DX51D GI/PPGL/PPGL COIL FACTORY
1.Kayyadewa:
| Fantin Karfe Nada / Sheet | |
| Daidaitawa | ISO, JIS, AS EN, ASTM |
| Daraja | Q195 Q235 Q345 |
| SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 | |
| SGHC SGH340 SGH400 SGH440 SGH490 SGH540 | |
| DX51D DX52D DX53D DX54D | |
| S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | |
| Saukewa: SS230SS250 | |
| Nisa | 600mm zuwa 1500mm |
| Kauri | 0.125mm zuwa 4.0mm |
| Tufafin Zinc | 40 zuwa 275 GSM |
| Substrate | Cold birgima Substrate / Hot birgima Substrate |
| Launi | Ral Color System ko kamar yadda kowane samfurin launi na mai siye |
| Maganin saman | Chromated da mai, da tururuwa-yatsa |
| Tauri | M , rabin wuya da wuya inganci |
| Nauyin nada | 3 ton zuwa 8 ton |
| ID na coil | 508mm ya da 610mm |
2.Girman samuwa
| Suna | Kauri | Nisa |
| Fantin Hot-tsoma Galvanized Karfe Coil | 0.2 ~ 1.5mm | 600 ~ 1250mm |
| An riga an yi fentin 5% Al-Zn Rufin Karfe Coil | 0.2 ~ 1.5mm | 600 ~ 1250mm |
| An riga an yi fentin 55% Al-Zn Rufin Karfe Coil | 0.2 ~ 1.38mm | 600 ~ 1250mm |
| Nau'in Samfur | Ƙarfe-Ƙarfe na Ƙarfe Mai Zafi (PPGI) da aka rigaya | Pre-Painted Hop-Dip 5% Al-Zn Coated Karfe Coil (PPGF) | Pre-Painted Hop-Dip 55% Al-Zn Rufaffen Karfe Coil (PPGL) | Ƙarfe Mai Ƙarfe da aka riga aka yi |
| Nau'in Rufi | 1. Polyester (PE) 2. Silicone Modified Polyester (SMP) 3. Acrylic 4. Polyvinylidene Difluoride (PVDF) | PVC Plastisol | ||
| Ƙayyadaddun bayanai | CNS 10804 (2013) CNS 15298 (2013) CNS 15299 (2013) JIS G3312 (2013) Farashin CGCC CGCD1~3 Saukewa: CGC340 Saukewa: CGC400 Saukewa: CGC440 Saukewa: CGC490 Saukewa: CGC570 JIS G3318 (2013) CZACC CZACH CZACD1 CZAC340 CZAC400 CZAC440 CZAC490 CZAC570 JIS G3322 (2013) Farashin CGLC Farashin CGLCD Saukewa: CGLC400 Saukewa: CGLC440 Saukewa: CGLC490 Saukewa: CGLC570 ASTM A755 (2016) AS2728 (2013) EN 10169+A1 (2010) | JIS K6744 (2007) SG SA ASTM A755 (2016) EN 10169+A1 (2010) | ||
| Nau'in Rufi | Alamar farko: PU ko Epoxy 5μm Tsawon tsayi: 15-20μm Baya Primer: PU ko Epoxy 2μm Gashin baya: PE ko Epoxy 5-12μm | Bayani: Epoxy Topcoat: PVC PLASTISOL 150-250μm Baya Primer: PU ko Epoxy 2μm Coat baya: PVC PLASTISOL 100 - 250μm ko Epoxy 7μm | ||
| Maganin Sama | Ana iya amfani da fim ɗin kariya Karfe Embossed Itacen Cedar Stucco Fata | PVC Embossed Fata Lichee | ||
| Jawabi | 1. Ma'aunin ASTM da aka gabatar anan sun ɗauki tsarin awo daidai.(Tsarin masarautar yana share “M” bayan lambar ƙayyadaddun su, kamar A755 da A792.) 2. Kauri mai rufi shine don tunani kawai. | |||
Ku rubuta sakonku anan ku aiko mana
